New S9 Mic Input Not Working
Hello,
I just got a brand new DJM-S9 and fresh out of the box the microphone input isn't working. I have swapped out 2 different XLR with different 1/4" and still nothing. I have ensured that MIC is selected on the back of the mixer. This mic was working today in my Rane 57.
The only way I can get a peep from the MIC is if I turn the mic volume and echo all the way up. Doing this, I can hear a faint echo of what was spoken.
I've scoured the internet for similar issues but have been unsuccessful in finding a solution.
Any input would be great.
-Renzo
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Are you monitoring the booth output? It's possible you have the mic-to-booth disabled in the preferences.
Hello thank you for your reply, So I found the preferences on the S9 and the mic-to-both is enabled. I turned it off an on to see if it triggers anything to work but still no luck. Again when i turn the echo all the way up, I can hear a faint echo of what was said.
Are you connecting the mic with an XLR cable or a TRS or TS connector? Can you please provide a photo of it? Thanks.
Hello,
I have been trying XLR and TRS. Both have been successful is using the MIC on my Rane 57, just yesterday.
I have also updated the firmware and the software and hardware are still not recognizing the mic.
Below are the pictures of the cables I have been using.
Thank you,
-Trent
I too am having issues. DJM S9 is a month old. New Shure mic fresh out there box, I have to have the mic level turned up all the way to hear anything and the talk over appears to do nothing.
Siavash,
I determined the mixer was bad. I tried everything and it still didn't work. I ended up sending it to Pioneer authorized repair shop in Los Angeles because the shop I purchased it from had never responded to my emails about a return.
I hope you can exchange your mixer.
-Renzo
6 comments