controlling other midi gear with toraiz
i know how to midi outside gear to toraiz and use the sequencer to play and record the outside gear.
and i know how to start stop by midi using the outboard gears sequencer but what i am wondering is (and I hope i am explaining this right)
i want to use the toraiz as main sequencer for all samples inside... but i want to be able to not only start and stop my tb03 sequencer i want to be able to assign it to a mute button so that when i am playing it together and i want to stop or stop the sequencer in a track i can... kind of like a mute on the toraiz.... is this possible?
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Hi Gruvhard,
I'm not sure if you are using the Toraiz SP-16 or Toraiz Squid to sequence your TB-03. But the principle is the same for both Toraiz devices.
Toraiz devices can send 2 types of MIDI data:
The first type is MIDI sync. MIDI Sync tells your TB-03 sequencer to start and stop at the same time as your Toraiz device. So if your musical note data is programmed into the TB-03's internal sequencer, then every time you start and stop your Toraiz gear, the TB-03's internal sequencer will start to play in sync.
Now, if you want to mute your TB-03 using the Toraiz gear, then your musical note information should not be in the TB-03, but programmed into the Toraiz gear instead--and the TB03 should play a blank pattern.
Any of the Toraiz's 16 tracks can transmit MIDI Note data. Just make sure the Toraiz is transmitting on the MIDI Channel that the TB-03 is set to receive on.
Does that make sense?
1 comment