DJM-850 popup when comeback from standby
Hi.
I have a djm-850 at home that have never move. But for now about 3 week, sometime when I press the wake-up button, I hear a big POP trough boot output, main output and monitor.
After I hear a small but notifiable white noise trough all output and if I try to play something, input meter display something but not output play any sound.
If i turn off power switch and turn it on again, one on 2, it pop again the other, it comeback normally.
It even append once,, will playing that I heard the pop and the mixer stop working, power it off/on, and was back again.
Any idea anyone?
Thanks.
Nitrof
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
If no sound was heard after it was powered-up, then there's likely a problem with the hardware. Please contact a Pioneer DJ authorized service centre in your region to have your mixer inspected and/or repaired.
I'll suggest that you shut down the mixer instead of leaving it to go into the sleep mode, but you may also try updating the firmware.
Firmware is up tu date, it still pop when power on instead of wake up.
That can happen - which is why the power-on order is typically CDJ / turntable / other inputs > mixer > outboard devices > speakers / amplifiers. Then the power-off order is reversed.
less normal to append while mixing. It append twice now...
Update:
This morning, the mixer was power of, I turn the switch on, I heard the pop trough the headset (every else was off), then no sound was coming from phones and I add to try by 3 or 4 time, to restart it before it works. It wor after I leave it open for a minute then restart it.
6 comments