External MIDI and AS-1 Set to Salve for sync to DJ controller
Hi there
I've had a good read through here and can't find the info I'm looking for
I've got midi sync out data from my DJ controller over 5 pin din
Set my AS-1 to slave expecting it to simply pick up the signal but no BPM value shows on the screen
Many thanks Anthony
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Hello Anthony,
For the AS-1 to sync via midi please make sure the following is setup correctly.
To select the method to send/receive MIDI, go to [GLOBAL SETTING] and check the settings at [MIDI Param Send] and [MIDI Param Rcv].
For more setup information you can check out
http://faq.pioneerdj.com/product.php?lang=en&p=TORAIZ_AS-1&t=faq&c=search&qq=midi
I have done this MIDI Param Send and Receive set to NRPN and MIDI Clock Mode set to 'Slave' and it is still not syncing, I don't get it it's only a MIDI signal
What am I missing?
Kind regards Anthony
What Dj Controller are you using?
Are you going MIDI OUT from the Dj Controller to MIDI IN to the AS-1?
Hi DJ Creme
It's a Roland DJ-808 with one 5 Pin Din on the back which only sends MIDI Sync Data
There are no MIDI settings in its set-up and this port only sending sync data nothing else
I'm a bit puzzled
Kind regards Anthony
Do you have the latest firmware update to the AS-1?
Im currently testing the AS-1 with various MIDI out hardware and its receiving the signal just fine. Im not too familiar with the Roland DJ-808 but you might want to verify that there is a setting you have to change to get the unit to send MIDI out.
Have you tried sending MIDI out to another external unit besides the AS-1 from the Roland Dj-808?
Let me know..
Thanks
Check that the AS-1 is receiving MIDI clock from the DIN jack and not USB: Global menu page seven.
6 comments