REKORDBOX DVS with DJM2000 & CDJ2000MK1
Hi, please advise on where i'm going wrong with RB DVS. My system setup is as follows:
Pioneer DJM2000 Mixer
Pioneer CDJ2000 MK1 - 2 pieces
Laptop with 3 x USB cables - 1 to the mixer and 1 each to the decks
Rekordbox Ver. 5.6.0
I connected the USB cables, started up RB and set it to Performance Mode. In control mode, the Decks have been set as Deck 1 (connected to CH2 of mixer) & Deck 2 (connected to CH3 of Mixer). Input selector has been set as USB 3/4 for DEck 1 and USB 5/6 for Deck 2. When I go to the DVS calibration and select the Start Auto , I do not see the green circles in the window and the software returns a "Failed!' error, no matter which decks is been selected.
Your assistance will be appreciated !!!
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
To be perfectly blunt, there is no difference - the HID is more responsive in that the software doesn't have to interpret the audio signal, it just "happens." Give HID a try, you get so many more features available that way, including looping, hot cues, browsing on the CDJ itself, etc.
And the reason DVS isn't working for you is the DJM-2000 doesn't support DVS input (it only has one input, or zero, depending on the configuration).
Can you tell me why you're using DVS when the CDJ-2000's have the capacity to use HID mode, providing more accurate and expansive control of rekordbox?
Hi,
Thanks for the reply. The reason I am attempting to use DVS is for scratching...I am not getting the correct feel using it in standard vinyl mode.
I was under the impression that running on DVS will provide a smoother scratch experience than just a standard vinyl mode
...am I missing the point of DVS?
3 comments