Lighting Fixture Request: Xiang Yi Lighting / STL1003 Update
Hi,
I'm not sure if this is the proper way to request such change but in the previous post here:
The way the fixture was done perfectly reflected the DMX channels but does not allow me to reassign it to other Fixture roles because of Channel 1 being assigned as a Pan Rotation. Consequently, when assigned as an Effect 1, Effect 2 or Laser role, the moving head spins non stop on the Pan axis.
By having the Tilt/Pan channels mapped independently, I'll be able to create a more wide array of alternative use of these moving heads (which are an hybrid between spot moving heads and lasers).
Thank you so much!
Here is the fixture update request:
Fixture1:
Manufacturer: Generic
Name: Generic Moving Laser 8bit
Type : Moving Head
DMX mapping:
| Aisle/Channel ID | Range of variables | Description | |
| CH1 | 0 | 255 | X-Axis position control ; Equivalent to Pan 8bit |
| CH2 | 0 | 255 | Y-Axis position control ; Equivalent to Tilt 8bit |
Fixture2:
Manufacturer: Unknown
Name: STL1003 Laser
Type : Moving Head
DMX mapping:
| Aisle/Channel ID | Range of variables | Description | |
| CH1 | 0 | 255 | Pattern control ; Doesn't do anything can be used as dummy channel |
| CH2 | 0 | 255 | Motor speed control, from fast to slow |
| CH3 | 0 | 255 | Total dimming/laser intensity |
| CH4 | 0 | 255 | Red color |
| CH5 | 0 | 255 | Green color |
| CH6 | 0 | 255 | Blue color |
| CH7 | 0 | 0 | Strobe off |
| 1 | 255 | Strobe from slow to fast | |
| CH8 | 0 | 50 | Channel 1 to 10 are valid |
| 51 | 100 | Self-propelled mode 1 | |
| 101 | 150 | Self-propelled mode 2 | |
| 151 | 200 | Voice control mode 1 | |
| 201 | 255 | Voice control mode 1 | |
| CH9 | 0 | 255 | Speed corresponding to the self-propelled mode |
| CH10 | 0 | 199 | No effects; it's just to control channel 1 to 9 |
| 200 | 255 | Reset the device for 5 seconds | |
Thank you so much for the amazing product support.
Frank
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Hello Frank,
Firstly, the Fixture 1 (Generic Moving Laser 8bit, Moving Head) has not been included in the fixture library so that you cannot use it with the Fixture 2 (STL1003 Laser, Moving Head). If you want to use Fixture 1 with the Fixture 2, please request it in the Forum page below.
https://forums.pioneerdj.com/hc/en-us/community/topics/115000046523-Lighting-Fixture-Request
Secondly, the Fixture 2 does not work as you described. Please see the rekordbox lighting library as shown below. Each channel works in the ways below. Also, the channels with (*2) cannot be controlled with rekordbox lighting. This is how your fixture works with rekordbox lighting app.
Thank you for your kind understanding.
Pioneer DJ Support
1 comment