DJM-450 send / receive effects (Audiobus)
Craig MulvaneyToday at 19:29
I have my iPad connected to the USB send/receive port, audiobus 3 on the iPad with phlox phaser as the effects app. In audiobus I have selected channels 1+2 as the input, then phlox phased as the effect and then the DJM as the output. Nothing works regardless of whether I have the effects selector as AUX or INSERT.
How is this supposed to Work?!?
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
The photo was either taken between blue blinks of the on/off button, or you have the wrong channel selected for the input on the FX section. If you're using it on AUX mode, you need to select a source; CH1, CH2, MIC, CF-A, or CF-B are the only options.
It was on (flashing), pic just didn't pick it up.
So is this the right setup? Asking as I couldn't hear any difference at all when changing wet/dry or feedback in the app
Okay, so when using it as AUX, with your source selected on the FX section and the S/R turned ON, the signal is sent to the Audiobus input, through the desired application, to the Audiobus output, then back into the S/R loop, which then comes back to the AUX channel - so you need to ensure that switch is turned to AUX and that your volume for it is turned up.
3 comments