DJM900nxs2 outputs sound on 2 channels when connected via USB
What I got from time to time (right now I cannot replicate the issue if I want to) is that I get a low volume signal on channel 2 of the mixer when USB input is selected. Main singal is on Channel 1 of the mixer - which is fine.
Setup is that Channel 1 is selected for USB input (doesn't matter if USB 1 or 2 is used, as long as Channel 1 and 2 has the same selection) and rekordbox DJ is set up as Output 'Out 1 and Out 2'
When the issue occurs I got output on the mixer on Channel 1 - as usual with the correct volume and on Channel 2 (which should not happen) with a low volume.
When powering down the Mixer and power it on again, it is back to normal (no sound on channel 2).
I must admit that I haven't seen it since I changed to the new Windows 10 driver (v 1.200). I will keep an eye on it, but wanted to check if someone else experienced this?
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Out 1/2 are the same output; 3/4 would be CH2, per the second image you posted.
I know. Maybe I explained not clear enough. CH2 on the Mixer got the same Sound in Addition to CH1. According to rekordbox Setup it should be CH1 only.
As I don‘t configured 3/4 in rekordbox, CH2 should be silent.
Let us know if it happens again -- as you state, it hasn't happened since updating.
@Pulse.
Sure, will keep an eye on it.
btw. When I logged in via my iPad through Safari this time, it worked just right away. 😀
4 comments