DDJ-FLX10 USB INPUTS ADVICE NEEDED
We have a customer that recently purchased a FLX10 and is connecting two separate PC's to the USB A and USB B inputs. Then he is switching back and forth between the two inputs on the fly, on the same channel.
When switching from A to B, sometimes A will still play, and vice-versa.
We told him that this is probably not the intended use and he shouldn't do that. Anyway. Sounds like normal operation for an abnormal situation.
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
It should be working as it is. It is likely firmware instability.
I have not setup this way. I was able to connect 2 laptops. First one using channels 1 and 2, Second one Channel 3 and 4.
1 comment