SP-16 DJ LINK
HELLO,
Has anyone been successful with getting the SP-16 to work with a rig like mine.
I have 2 x CDJ-900 and the 900 mixer (older first gen with Midi)
I just want to be able to make transitions from one CDJ to the Sp-16 and back to another CDJ.
Any help with be appreciated
Thank you, David Anthony
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Hey David,
As the CDJ-900 has ProDJ Link over ethernet, you can connect the CDJ and the SP-16 together to synchronize the beat grids.
I'm actually using the DJM-800 mixer
Hi David. Page 20 of DJM-800 manual.
After you've done this, you've gotta confirm that SP-16 is set up to receive MIDI clock (tempo) information from the DJM. To do this, go into SP-16 Settings menu and make sure the following parameters are set as follows:
PROJECT SETTING (MIDI IN)
CLOCK: ENABLE
MIDI START/STOP/CONTINUE: ENABLE
NOTE/CC: DISABLE
That should have you sorted. Now SP-16 will lock to the MIDI clock signal coming from DJM-800, whose tempo should be following along to whatever signal is coming into it.
3 comments