DVS calibration
I bought a DJM250 MK2 with two PLX500 with rekordbox DVS ant timecode vinyl. I started the calibration but i have no idea if is it good. Please help, I'm a beginner with this,
thanks You for answer forward. Best Regards, Viktor
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Ew, no. lol - it should look like a circle.
Your audio configuration all looks correct, but the signal scope does not. I would check that both the L and R connections between the PLX and mixer are correct and that you have the input set properly; match the mixer channel input to the setting on the PLX output:
And verify you have the L and R connections in the right terminals, otherwise the timecode will go backwards.
If it still doesn't look like a circle, check the headshell connection or possibly the cartridge wiring to the headshell.
@Viktor did you solve the problem? I'm having exactly the same issue with the same draw in the graphic. I have the same setup (250mk2 + plx 500) with the pioneer timecode vinyl
Tried everything and I can't get the damn 2 circles!
help me please
ha, now it works with the 2 green circles! it was a matter of matching the 'phono' switch on the plx 500, didnt notice that! :) thanks a lot
3 comments