DJ WEGO Problems on firmware update
Cant update firmware on wego. Windows 7. 64 bit
I follow the instructions and when i run the jar file (in firmware update mode) tells me "dj wego not connected".
I try v1.08 and v1.09 of firmware. My wego has v1.04
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Have you tried a different USB cable and a different USB port on your computer?
Thanks for the answer. The cable works because, i use this cable for play the console with vdj or cross.
Also i tried wih 3 usb ports and nothing.
I watch device manager when connects the wego in "firmware upd status" mode and i can see the wego item.
Also when i connect pioneer in f upd mode , makes a noise
It will tell you that the WeGO is not connected if you don't put the device into update mode by holding both headphone cue buttons while powering-on the WeGO. You'll see all of the meter LEDS flashing to indicate it's in update mode. Only then should you run the update.
All time that i probe to update the console was in
Update mode (two Meters flashing).
Is there anything different to probe. For example in devoce manager.
For example something rare when i watch the firmware version with the utility, in normal mode says 1.04 but in update mode says 2.06.
It shouldn't show you 2.x anywhere -- the newest firmware for the WeGO 1st gen is 1.09.
Have you tried using a different computer to update the WeGO?
It works with other computer. I had mi desktop pc broken but fortunately yesterday was ready.
In notebook 64 bit did not work. Instead 32 bit pc desktop yes.
Thanks for help
Great - and now the WeGO works with both computers?
7 comments