DJM S9 Win7 Driver Error

If you have a driver error with Win7 and when installed causes a Digital Signature Error (Code 52). You have to DISABLE the Windows Digital Signature option. See Below for 2 methods. Took me 4 hours to figure this out.

Disable Digital Signature in Windows 7, 64 bit

There are two ways to disable it:

Method 1.

Go to Start Menu and type "cmd.exe" in the Search Bar and press <Enter>. (Remember you must be logged on as Administrator)

OR you can go to "All Programs", then "Accessories", right-click on "Command Prompt" and choose "Run as administrator".

1. Now type the following and press <Enter> after each line:

bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

bcdedit.exe -set TESTSIGNING ON

1. Restart your computer

2. This will disable your Windows 7 driver signing.

OR

Method 2. (I used this one)

1. During boot-up, continuously press <F8> to get to Advanced Boot Options. Note: On some systems, you need to first press <F2> to go into Boot Menu, then press <F8> to reach Advanced Boot Options.

2. When the menu appears, use the DOWN arrow key to scroll to “Disable Driver Signature Enforcement.”

3. Press <Enter>.

4. Continue the boot process.

5. After your computer has completed the boot process, please install the drivers per the included instructions.