EUROLITE LED BAR RGB 252/10
hello , in the fixture library is this lamp present an registered whith the right channels, but is does not work!
thx Marco
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Could you please explain what does not work? If you mean it does not throw light, we would need some more information about how the first and second channels work because it seems that the manual is a bit confusing. If you have the fixture in your hands, could you please tell us if the second channel is the main dimmer of the fixture? If it indeed is, what does the "Dimmer 1" and "Dimmer 2" dmx ranges control in Channel 1?
On CH1 is the function setting, with CH4-CH12 one third of the LED is activated (1-15 CH1 dimmer 1)
with CH4-CH6 all LEDs (16-31 CH1 dimmer 2)
CH2 is to be used as a dimmer
In order to handle those two special cases (Dimmer1 and Dimmer2 on channel 1), we have created two modes for the fixture. In case you want to use it with the Dimmer1 setting you can pick Mode 2, which is 12 channels and vice versa for the other setting. Could you please try that and tell us if you still have issues? Also, please try to describe what exactly doesn't work.
On behalf of Pioneer DJ,
AtlaBase Ltd
There is no light, I have tried the 6 and 12 channel mode. In order to check the dmx address the LED BAR tested on my old DMX controller as it works fine
We have updated the fixture in the Atlabase database. It will be reflected in the next rekordbox fixture library update. Please find the latest update of the fixture library here.
On behalf of Pioneer DJ,
AtlaBase Ltd
If the lamp has been updated in the last update, the problem persists that the led bar does not emit any light!
There was an issue affecting those fixtures. Could you please update to the next rekordbox library version once it is live, and report back to us if you still have issues?
Hey guys i have the same Problem with this light can u plz help me ? Mit freundlichen Grüßen Tinosaurier
Could you please tell us which mode are you using?
On behalf of Pioneer DJ,
AtlaBase Ltd
I used both modes the 6ch and the 12 ch but nothing happen
Do u need something of the manual?
Hello? Could u guys help me plz i have a gig ok friday an i rly need these lights?
Dear Sir,
We updated this issue on Fixture Library ver1073.
Once you should delete a mapped fixture on Fixture Mapping, and re-search and re-mapping one.
Thanks,
13 comments