cdj 2000 nxs2 pro dj link support for V10
So the V10 has 6 channels.
As I luckily own a pair of cdj 3000`s and a pair of nxs2`s i would like to set up the NXS2`s on channel 2 and 5.
However the NXS2`s only support up to player "4" making this an odd configuration, setting one of the NXS2`s as player "1" on channel 5 on the V10. resulting in the "On air" red ring not lighting up as intended.
described her by Mojaxx in DJ Citys rewiev on the V10 at the minute mark 9:20 https://www.youtube.com/watch?v=8wZYHl5-SM8&t=982s
The obvious solution is to have the NXS2 supporting beeing set up to player 5 and 6 as the cdj 3000`s
Hoping for a quick resolution
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Sorry, the networking module in the CDJ-2000's is not capable of addressing higher than 4, so unfortunately there are no updates that can be made to correct that, Sorry!
I understand the network modul is lower spec than the 3000`s but still it is capable of 4 decks. How about sacrificing having it set to deck 1 ?
Ie: replace deck 1-4 with deck 2-5?
should be possible with a config change via a firmware update as an alternative for those who need it :)
Im sure im not alone with this issue..
please run it by the dev team
Much appreciated in advance
Sorry, it's not that it can't access 6 devices, it can't be assigned to player numbers higher than 4.
3 comments