HOT CUES AUTOPLAY

@Hunter > If you want your tracks to start as soon as they are loaded, turn AUTOCUE off by holding this button for 2 seconds. 

In regards to Hot Cues, this has always been how Hot Cues are handled on CDJ's and therefore the technology was carried into the XDJ line.  

But, you can accomplish what you are trying to do in a different way.  By setting Cue Points to Memory.  Here is how to do it.

1. Move the playhead to the desired location
2. While in Pause mode, press the CUE button to set a cue point
3. Now press the MEMORY button
   
4. Repeat this process up to 10 times per track
5. Now you can jump to any of the Memory Cues by pressing the Left or Right arrows.

This setting is for laptop use

Please take a look to the settings and then go to the "controller" and at the bottom you will see the last setting "Hot cue" and must be select the little blank box with "tik"sorry 4 the size...

Now load a track BUT don't push play button first,select your Hot cue

For release and start the track must be push the play button one time at least

I hope I helped.

@Panagiotis > The setting you are referring to is for people using rekordbox dj.  Since Hunter didn't mention he was using software to perform I gave him instructions regarding XDJ-1000 settings.

@mark ... Same for xdj 1000 mk2? And can we jump cue points via our ddj-sp1 plugged in the network?

Yes.

@mark What controls on the ddj sp1 for those cue calls??? Any guide on mapping of that thing as xdj1000mk2 visuals?

@Franz > Did you mean a hardware map?

https://rekordbox.com/assets/diagram/en/DDJ-SP1_Hardware_Diagram.pdf