Pioneer speakers to Rookits 5s not working? Problem lies with controller as I swapped them with my production desk ones!

It sounds like you're having some trouble getting the sound from your Pioneer DJ speakers (Rokit 5s) to work properly with your XDJ RX3 controller.

Firstly, kudos to you for troubleshooting and swapping the speakers with your production desk ones to rule out any issues with the speakers themselves!

Since you've already checked the settings and adjusted the phase to match the speaker placement (left to left, right to right), let's try some other troubleshooting steps:

1. **Check the speaker settings on your XDJ RX3**: Make sure that the speaker settings are set correctly on your controller. You can do this by going to the "Setup" menu on your XDJ RX3, then selecting "Audio" and then "Speaker Settings". Ensure that the correct speaker settings are selected for your Rokit 5s.
2. **Check the gain levels**: Verify that the gain levels on your XDJ RX3 are not set too low. Try increasing the gain levels slightly to see if it improves the sound. You can do this by going to the "Setup" menu, then selecting "Audio" and then "Gain Levels".
3. **Check for any loose connections**: Make sure that all connections between your XDJ RX3, Rokit 5s, and any other equipment (e.g., cables, adapters) are secure and not loose.
4. **Try a different audio source**: Try playing audio from a different source (e.g., a USB stick, a laptop, or another device) to rule out any issues with the audio output from your XDJ RX3.
5. **Reset your XDJ RX3 to its default settings**: If none of the above steps work, try resetting your XDJ RX3 to its default settings. This will restore all settings to their original values, which might help resolve any issues.

If none of these steps resolve the issue, it might be worth reaching out to Pioneer DJ's support team or visiting a local authorized service center for further assistance.

I hope these suggestions help you get your Rokit 5s working properly with your XDJ RX3 controller!