Fixture Cameo Hydrabeam 4000 with control errors

The supported fixture Cameo Hydrabeam 4000 RGB can be configured in lighting mode of Rekordbox 7.0.9 with pan and tilt quite good. However when switching to performance mode only color, strobe etc can be controlled, but the defined settings of min/max values of pan and tilt are not used in the automatic show at all.

The lights are in completely other positions out of the range of min/max pan and tilt. That seems to be a severe software bug of Rekordbox! Does Pioneer not check this during implementation of fixtures? There are other postings in this forum about this fixture over the last 6 years!!! I tested with 10 and 56 channels with the same terrible result of pan/tilt control.

Overall the automatic shows of other moving heads like "Hero Wash 640FX" in Rekordbox look quite boring.  Even with powerful beats of techno music the Rekordbox light shows look dull.

Pioneer shall publish a list with fixtures, which are perfectly supported. May be only very simple RGBW devices are suitable for a show? I am using a DDJ-FLX10, but for good DJ sessions a separate DMX controller seems to be much much better for an impressive light show.