FLX-10 Recording issue
Issue: DDJ-FLX10 Recording Distorted on New MacBook Pro (Rekordbox 6.8.6)
I’m using a MacBook Pro (new), Rekordbox 6.8.6, and a DDJ-FLX10. When I try to record a set, the audio is distorted, faint, and cuts in and out. I’ve tried multiple setups to troubleshoot:
✅ What I Tested:
-
FLX-10 with old MacBook Air (Rekordbox 6.8.5) → Recording works fine.
-
FLX-10 with new MacBook Pro (Rekordbox 6.8.6) → Recording is distorted.
-
FLX-4 with new MacBook Pro → Recording works fine.
-
New MacBook, no controller → Recording works fine.
-
Reinstalled Rekordbox and firmware, restarted, matched settings across laptops → No improvement.
❓ Possible Cause:
Seems isolated to the combination of FLX-10 and the new MacBook, likely due to:
-
macOS audio permissions or blocked Pioneer driver,
-
wrong USB audio routing,
-
or PC MASTER OUT interfering with the record bus.
🛠️ Steps I’ve Tried or Plan to Try:
-
Check System Settings → Privacy & Security → allow Rekordbox microphone access.
-
Uninstall and reinstall the FLX-10 driver, making sure to grant Full Disk Access and approve the driver in System Security.
-
In Rekordbox Audio Preferences, uncheck PC MASTER OUT and use DDJ-FLX10 : MASTER only.
-
Verify Audio MIDI Setup to ensure FLX-10 is set to 44.1kHz and no aggregate devices are used.
-
Use Mixer Mode = Internal in Rekordbox for testing.
Looking for help confirming if this is a driver conflict or a known FLX-10/macOS issue. Appreciate any guidance!
Can't find help? Search our Support Site or alternatively, reach out to our Support agents