CDJ-3000X LINK function is malfunctioning
I have four CDJ-3000X and one DJM-A9, which are connected to a TP-LINK switch via network cables. However, yesterday and today, when I turned on the CDJ and plugged in the USB, the data link function completely failed. But I am sure the data switch is working properly, and restarting the CDJ can restore the USB LINK function. My CDJ-3000X current firmware version is 1.2. Please check and solve this issue officially!
Please sign in to leave a comment.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
TP LINK TL-SG1008D
I did notice that if you power up the DJM-A9 first, this issue doesn't occur.
After several days of testing, I found that opening CDJ without plugging in the USB, waiting for CDJ to recognize the PRO DJ LINK code for each device, and then plugging in the USB does not cause LINK connection failures. Sometimes, some devices may experience connection failures, but they can be recognized after a restart. However, if the USB is plugged in and then turned on again while CDJ is off, 90% of the devices will experience connection failures.
3 comments