DDJ 1000SRT Serato

Are you on Mac? When installing the drivers, did you bypass the driver security?

I'm also having the same problem.  I have Sierra 10.12.6.  Serato 2.2.0

I use an S9 as well, and this configuration is working for me.  I didn't need to bypass the driver security because of the OS.  Any thoughts?

@Umesh > You need to update Serato DJ to 2.2.2 please.

Great thank you ! This worked

You're welcome! Enjoy. :)

I am having the same issues as above...Track is loaded. Play button is pulsing green. Display shows up on jogwheels. When I hit the PLAY button, nothing happens. Please help. Using a MacBook Air macOS Sierra 10.12.6.

@Ron > Please ensure you've updated to Serato DJ 2.2.2 and have no other MIDI mapping enabled in the preferences.

Hi do I check that? I’ve since downloaded Mojave thinking this would solve the problem (before I read your comment) but to no avail

You can get the latest version of Serato DJ here, and to disable the MIDI overrides, open the preferences, click the MIDI tab, then click the DDJ-1000SRT in the MIDI DEVICES window, and ensure the Allow Serato Hardware Remapping checkbox above the window is un-checked.

If you have any MIDI PRESETS in the bottom window, you may consider saving them and removing them.

You can also click the Restore Defaults button to reset things to their default values.

It’s fixed! I activated DVS accidentally. The INT button was not highlighted so the board was temporarily “disabled!” I just deactivated the DVS so I wouldn’t run into this problem again. Thanks for your help!

That'll do it... reminder; you don't need DVS mode enabled to use the DDJ-1000SRT. ;)

Problem solved!!!

Hello! I am not getting the "Midi Tab" option. When I connect the DDJ to my computer the Midi Tab turns blue for 2.5 seconds, then I get a yellow/orange error at the bottom of my Software "Error: failed to connect audio!!" Help! Please!

@DNTFRT > That doesn't tell us much... Are you on Mac? Did you properly install the drivers?

Hi again, yes. I uninstalled and reinstalled. I can now modify the Midi Tab as necessary. 

Currently "play" is flashing green, and the BPM is finally showing on the jog wheel, even when I change the songs (which it wasn't doing previously), still nothing when I press play though. 

@DNTFRT > Do you have DVS mode enabled? I know a lot of DJs miss the fact that DVS mode comes along with the DDJ-1000SRT, and as a result, it's expecting external timecode input ... but you're using the controller, so it sits there. Either switch to INT mode or disable DVS.

Once I finally figured out how to deactivate DVS- it worked. Thank you!

Also, where do I go to switch to INT mode? Sorry, new to this sport! Thanks again!

If you have DVS enabled, you should see "ABS" or "REL" on the screen; click that and you can choose between the modes.

Glad that I stumbled across this post. I've been trying to figure this out for a couple of days with a couple of fellow dj's. It's finally working. I knew it wasn't a hardware or driver issue because the DDJ 1000SRT works JUST fine with VDJ. I just wanted it to work with Serato as well. Problem solved.