RMX 500 with xdj rx
Can anyone tell me how i can connect the rmx 500 with the xdj rx controller. Which cable do i need? Thank for your help.
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
As @Jay says at 1:49 of the video, the recommended connection method is running the master output from the XDJ-RX to the input on the RMX-500, and then from the output of the RMX to the speaker or other output / recording device.
It can be done, but without a proper Send/Return there will be issues with feedback and cueing and taking up a channel. The best use is with the drumming side. Your choices are to output the master 2 into the RMX and then output the RMX back to channel 1 or 2. The RMX is really made to have a signal into and then return it back to the mixer so you can send it out to audio.
https://www.youtube.com/watch?v=X8ePdPitT1A
2 comments