xdj r1 crossfader
xdj R1 crossfader
Hi :-)
i have a problem as i don t seem to find out how to set my crossfader.
As we speak although it s not in scratch mode it doesn t do the fading.
Meaning if i move the switch only 5mm instantly the other track is heard and activated , whilst it should be slowly fading from one track to the other.
and it s really annoying.
Is there anyone that can help me with this?
thanks a lot
EC
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
put the cross/curve switch in the middle
Hi Brichi .. thanks for replying i already did..THAT is actually my problem...if it would be on scratch mode or cross ,than it would be "normal" but i have the switch and the"mode" as per your picture...and still it happens what i mention above...
damn, could be a physical issue that need to be repaired, you may need to have it serviced unless a Pioneer rep chimes in with other options for ya, sorry man
thanks Brichi !! :-) let s hope it not technical ...thanks for your help mate
anytime! good luck
Are you using it with VDJ or CD/USB?
Hi Mel :-) cd s only
If you have the curve adjust set to X then it should be slowly fading rather than starting it at full volume at 5mm. It could be a hardware thing, but first - have you ever used the remotebox software? Have you tried updating the firmware on the R1?
Hi Pulse :-) thanks for replying. i don t use remotebox as i work only with vinyl and cds and neither did i update the firmware..
ps..is there anything on the settings (touch sense , cues etc) that i might have activated that cause this ?? maybe i screwed up settings does that have any influence? i have the crossfader on start of course and basically taht s what i did...
Not that I can think of -- the first thing to try would be a firmware update. You can get the download and instructions here.
11 comments