DJM 900 NXS Left Master Channel cutting out
My left master channel signal has begun to cut out intermittently. It 1st happened at home, playing at regular/low levels on monitors. I though might be bad xlr cable so switch them out, issue went away.
Was then playing out and channel cut out during a set. I tried un plugging/replugging xlr but didn't seem to effect it. It kept cutting in/out on different tracks.
Was in the green on line levels/gains as well as master.
Any thoughts on what might cause? Should I swap out the left male master out and see if fixes it before having to send it in for service?
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
@Jeff > Looks like you've taken the proper steps to troubleshoot the problem. The mixer seems to be the likely culprit. It could be something as simple as a loose solder connection or possibly something more complex. Unfortunately, there is no way to know without taking a look under the hood. You can find a local service here or you can initiate a factory repair here.
Additional info: I was playing though a Serato SL3 box, happened on both channels 1/3 and 2/4.
2 comments