USB issues
Hi all,
Should there be any issue formatting a 128gb 3.0 Lexar Jumpdrive in Mac HFS+ with a CDJ 2000? I tried all kinds of hacked ways to format the large disk in FAT32 as I didn't know HFS+ was apparently compatible, but when I finally did get the drive loaded (formatted in HFS+), it has not been performing properly. It loads the tracks ok in RB, but becomes very unstable and often freezes when I plug it into the CDJ 2000.
Is it the format of the drive, the drive itself, or the fact that I did a lot of format and re-formats making the disk itself unstable.
Thanks
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
No hacking required to get a 128GB drive to FAT32, but yes, you can use HFS+.
If it's not reading on your CDJ, it could be the drive itself is the problem.
FAT32 will only format up to 32GB. What am I missing to get it to see all 128GB of the drive that I have without special utilities that haven't proven to be very successful?
I'm going to return the drive that I bought and try a Scandisk model, format in OSX HFS+. Hopefully I'll have better luck.
3 comments