CDJ 2000 Jog Wheel Issue: Cannot Scratch / Pitch Bend
Hello. My CDJ 2000 is having an issue with the jog wheel.
There is no control when I try to pitch bend, scratch, or needle lock to move forward a backward in a song. After looking at the diagram below, I think the gears inside are not being read by part 3.
I tried reupdating the firmware and did a hard factory reset.
Ideas anyone? Anyone ever have this issue?
Any thoughts or direction will be much obliged.
Cheers!
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
I know from checking in the past that the disc (part 34) is inserted into 3 and read in the slot, if 3 goes bad then yes, the jog wheel has no response.
If you have 2 players, try swapping part 3 from the working player to the faulty player and see if it fixes the issue, if it does then you know what to order
Deductive logic is exactly what I used.
Opened the other player. Swapped some parts and now they both work fine.
I believe it was simply the connection from part 3. For what connection seems like it's backwards or upside down to me.
This all happened after I replaced the sensor ring. Super stressful but rewarding!
Thanks for the message back! TICKET CLOSED.
glad to hear! thats awesome
3 comments