Laser Stage Lighting - SD-RGB500
- Manufacturer: Laser Stage Lighting
- Model Name / Number: SD-RGB500
- Fixture type (eg. par, bar, mover, FX, etc): Laser
- A link to the product website (not a retailer page please!): Unknown
-
A link to the product manual: https://drive.google.com/file/d/1fSMX6ZEfnt-ICfp3j9FPJ4UuL2Vk1nZK/view?usp=sharing
(No link to the manufacturer hosted manual, but I did take a picture of the one provided with the fixture.) -
DMX channel modes (where available):
Page 1: https://drive.google.com/file/d/1fSMX6ZEfnt-ICfp3j9FPJ4UuL2Vk1nZK/view?usp=sharing
Page 2: https://drive.google.com/file/d/1eXuKOhoNaUi53JB8oiDd5ip2PkTxTGcQ/view?usp=sharing
Page 3: https://drive.google.com/file/d/13aZ_tK8JdDvT8_s0CQF4kmscqf-nFEb6/view?usp=sharing
Let me know if you need me to add text for the DMX channels, and not just pictures.
Thanks!
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Hello Jake,
Do you use the lighting fixture shown below?
Manufacturer: Unknown
Model Name / Number: SD Card RGB Animation Laser
If so, most of the channels you requested to be customized are not currently supported by rekordbox lighting.
Especially, channel 4 (x-axis position) and channel 5 (y-axis position) are not supported.
Sorry for not meeting your expectation and thank you for your kind understanding.
Your fixture request has been added to the AtlaBase library. It will be reflected in the next rekordbox fixture library update (performed once a week on Wednesday or Thursday except for the national and company holidays). Please find the latest list of the library fixtures here (under Fixture library lists).
Manufacturer: Unknown
Fixture: SD Card RGB Animation Laser
On behalf of Pioneer DJ,
AtlaBase Ltd
I tried out the settings and it looks like some things are not quite correct.
The fixture defaults to off, and i have to use Direct DMX Control to set channel 1 with a value over 200 for "Manual Mode".
Also the rotate control in the macro editor is actually controlling "drawing" channel 10 when it should be controlling channel 9 "center rotate".
The fixture description is correct, but the actual channel mapping in the software seems to be off.
From my testing it looks like the manual provided with this fixture is incorrect for channel 9's (center rotate) value's:
Automatic Counter Clockwise Rotation Values 129 - 192 (slowest rotation - fastest rotation)
Automatic Clockwise Rotation Values: 193 - 255 (slowest rotation - fastest rotation)
Manual Rotation Values: 1 - 128
It would also be cool if the fixture "Pan" controlled channel 4 (x-axis position) values 1-125
And "Tilt" controlled channel 5 (y-axis position) values 1-125 (1 = max tilt up, 125 max tilt down)
Hello Keiko,
Yes I do use that lighting fixture. The Channel 4 and 5 capability was just an idea, no worries if you cant make it work.
But were you able to fix channels 1, 9, and 10? as they are not mapped correctly, and do not match the channel mapping description in rekordbox https://forums.pioneerdj.com/hc/en-us/community/posts/7829488953753/comments/8454562072345
Hello Jake,
Sorry for taking time because they are still investigating why the correct colors or values do not output in several channels.
They need to customize all those channels so that it will take time and we cannot provide you with any timeline.
Thank you for your kind understanding.
Any update on this? Thanks!
Hello Jake,
Sorry for taking time to customize the fixture "Laser Stage Lighting SD-RGB500". Unfortunately, it may take longer than expected. Thank you for your kind patience until any news is ready.
9 comments