Ddj wego 3 firmware issue
Pitch slider not acting accordingly when shift is held in serato dj. Instead it affects the tempo of the song.
Notmal behaviour should be when shift is held and pich slider is moved. It should not affect the tempo of the song on the deck.
Its a brand new controller. Firmware 1.05
There is a post on the serato forhm about this issue.
The release note for firmware 1.05 seen to point to it being the problem.
It says fixed issue where pich slider does not work when shift is held. Which did not needed to be fixed. That is notmal behavior
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
@koolbreeze > Actually, no - the "Pitch" fader is doing exactly what it's supposed to do; speed up / slow down the playback, which affects the "pitch" of the audio. If you engage Master Tempo (Key Lock), the pitch remains constant while the speed changes.
When you hold the SHIFT button while moving the pitch fader, it puts the hardware into a "release" mode so you could have pushed the tempo to +8%, held the shift button and moved the pitch slider to the opposite end, then released the shift and moved the pitch fader all the way to the + end again to have the deck playback at +24%.
I guess ur not understanding me the.
I am using serato dj with wego 3.
A song of 90 bpm is on deck A.
I load a song on deck B and hit sync.
Both tracks are now 90 bpm.
If i hold shift on the wego 3 and move the pitch fader Nothing should happen.
However that is not the case. When i hold shift and move the pitch fader the tempo changes as if i am not holding shift.
Hope this is clearer now.
I have a sx2 and it works as it should when i hit sync and hold shift and move pitch slider.
I am sure its a wego issue.
If you look at the release notes for firmware 1.05 you can see the issue clearly saying pioneer brike the controller
Do u jnow of anyway to roll back to previous firmware. Thanks in advance
Yes, sorry - I missed that in your first post. You are correct, it should "release" and not perform any pitch change during a shift+pitch operation. I'll pass this along to the product team for review.
When there is a fixed if you let me know thru this thread would be good
hey will there ever be a fix for this issue. its good enough you acknowledge it exist...its been a couple months now that i brought it up.
@koolbreeze > Sorry! This fell off my radar; I had a response from the team back in December. Are you using Mac or PC?
I am using a mac
Try this file to downgrade the firmware to 1.03 where this doesn't occur; if you can't get that file, please let me know.
Ok. Appreciate it man. Gonna try it now
Ok. It works. Thanks
Awesome - and everything is working as expected now?
Well. That problem i had is no more. Cant say if any new issues arise as yet
12 comments