update firmware xdjxz
hello i have the xdjxz trying to update the firmware v112 when i go to do it i do the process turn on hold the reloop and usb1 button and then it ask me to connect the usb 1 port i do that and it does not do anything to update the screen stays on and says connect usb 1 and does nothing the screen stays on says connect usb1 in port i waited for like 10 mins still nothing please help
djdonniec
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Check the following
https://forums.pioneerdj.com/hc/en-us/articles/360031142792-Troubleshooting-When-the-firmware-update-does-not-start
@tomo i have a pc and i did format it fat 32 and the only file thats on the thumb drive is v112 upd file and i tryed it again and still doing the same thing what do you mean the root directory how do i do that?
please help
djdonniec
Donnie, can you please post a screenshot showing the contents of that USB drive?
@pulse here it is
Looking at the image, it seems that the UPD FILE is in the USB as shown below.
USB> XDJ-XZ_v112（FOLDER）> XDJXZ.UPD
Take out the XDJXZ.UPD FILE from the XDJ-XZ_v112 FOLDER and put it in the USB ROOT.
USB> XDJXZ.UPD
Got the same problem, file is in the root of the USB. Tries more usb's still the same problem.
Did you unzip that file to the root, or are you placing the zip file at the root?
Hi Pulse,
yeah, i unzipped the file, got the UPD file in the root of the USB.
Serious dont know what to do... its from 1.10 to 1.12
Did you check the following?
https://forums.pioneerdj.com/hc/en-us/articles/360031142792-Troubleshooting-When-the-firmware-update-does-not-start
・If you want to format USB to FAT32 with MAC, you need to do it with Master Boot.
・Is the FILE name XDJXZ.UPD?
Not recognized when XDJXZ.UPD (2) or XDJXZ (2) .UPD
The file on the USB is exactly like this: XDJXZ.UPD
The USB is new, and just format it to FAT32 on a windows PC.
So everything should be okay.......
But is it also set to MASTER BOOT RECORD? If it's not, the unit can't detect it as a "boot" drive to start the update.
Problem solved, as u said the USB was not on the MBR, now the XDJ detect the USB.
Thanks for your help!
12 comments