Toraiz sp 16 as 1
Hi all I'm wondering how I could set up the sp 16 and also the AS1 to my set up? I have CDJ 2000 NXS2 and also a DJM 900 NXS2 mixer? Just like to know how to connect these 2 up with my audio connections etc.
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Personally, when I've used this configuration, I've done it three different ways:
1) Connect the CDJs to channels 1&4, connect the SP-16 master output to channel 2, and the AS-1 to channel 3. This gives you an independent mixer channel for each source.
2) Connect the CDJs to channels 1&4, connect the SP-16 master output to channel 2, and the AS-1 to the input on the SP-16. This allows all the production audio to be controlled via the SP-16, and then its master audio has its own channel on the mixer.
3) Connect the CDJs to channels 1&4, connect the SP-16 via the send/return, and select AUX as the FX type and return to channel 2. This is basically the same as option 2 (AS-1 can connect in either option 1 or 2), but you now have the ability to record samples from the mixer.
Great thank you ! I was thinking more about option 1 so I have separate channels for each device, but with this option chosen will I still hear the both Toraiz devices if I record with the record out from back of mixer with a tascam recorder? Thanks.
@Danny > Yes! The recording output takes any channel which is is "open."
3 comments