[SOLVED] Sound coming through one channel on Traktor - PC
When I use Traktor the music only comes out through one channel for both decks. It also cuts out during every track. I followed the instructions to install the mapping and deleted it and installed it again but still having the same problem. Don't know what to do. I've attached screen shots of the controller manager, audio setup and output routing in case I have something at the wrong setting in these. Also noticed that everytime I close the preferences after selecting the 350 mapping, it reverts back to the Pro 2 default mapping. I'm using a PC, please help.
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Ok the reason the sound is coming through one channel is because it is running from the master
go to output routing and at the top change the mixing mode to external then it is will give you sound outputs for each traktor deck look at the pic traktor
second problem is the latency of the buffer needs increased thats why the sound is cutting out look at the pick traktor1 and increase the buffer size
Thanks Ric, will give this a try when I get home from work this evening and let you know how it goes.
No luck with that.Got them playing out of different channels but they were coming out of the wrong channels. The left deck was coming out of the right channel and the right deck was coming out of the left channel and once I closed the properties, it just reverted straight back to the Pro 2 default mapping. It won't stay on the generic midi mapping for me
@John > So switch the output audio preferences within the settings panel, it has nothing to do with the MIDI mapping.
Think I have it sorted, thanks guys
Hi guys,
I have a similar problem but when I changed the mixing mode to external i still had the same issue of it only coming through one line.
Do I need to download mapping for CDJ900 X2, and allen and heath xone 42 mixer? All running on a macbook pro.
I have the aggregates all set up too
Thanks!
@Tom > Please don't cross-post; I have answered your question in the other thread.
I have the same problem with the one channel, the 2 cdj's works perfectly just the sound come true one channel, i have tried all the different settings i have found on the internet. even with all the external settings and the winbuild soundcard.
I am getting crazy by this problem!!! please help i tried almost everything :)
grtz
@Carels > Lets start from scratch. Have you updated all the firmware on your players as well as updating your software to the latest build?
@Carels > Any update?
Closed due to lack of response.
11 comments