DJM-250MK2 Channel 2 coming out of one speaker
Hey,
So I have have the two cdj 700's connected up to a DJM-250MK2 and now the right channel (channel 2) is only coming out of the right speaker. This is the same through the cue on my head phones (left channel ( channel 1) is fine and coming out through speakers and both ears on headphones). I have changed the cables over and that is not the problem. Can any one help me out?
Thanks Sam
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
Troubleshooting 101:
Change the cable out of the CDJ-700 connected to channel 2. If the problem went away, the issue was the cable.
Swap the left / right connections on ONE END for the CDJ-700 on channel 2; did the audio change to now only come out of the left side? If it swapped sides, the problem is possibly the CDJ output. If not, try below:
Swap the input from the CDJ connected to channel 1, connect it to channel 2's inputs. Does the problem persist on channel 2? If yes, the problem is the mixer. If the problem is now on channel 1, the problem is definitely the CDJ output.
Did you get to the bottom of this mate? I have the exact same set up and have the same problem
@Benjamin > Did you try the troubleshooting I posted above? If so, what were your results?
Yes the problem persisted on channel 2 which must mean that the mixer is the problem, does this mean I will need a new mixer? I bought it brand new just 2 months ago
I'll direct you to please contact Pioneer DJ technical support in your region to have your mixer inspected and/or serviced.
5 comments