Come suonare con il vinile e ddjsx2
salve ho scaricato da poco la versione trial di rekordbox, volevo un'informazione sono un possessore di una ddjsx2 e volevo capire in che modo posso suonare oltre la consolle con un vinile mi spiego meglio a tre tracce ma la traccia del vinile non con vinile vergine ma con un vero e proprio vinile con incisa la musica su di esso e se possibile vedere all'interno del programma la traccia del vinile caricata Spero in una vostra collaborazione grazie anticipatamente.
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Official comment
If you're asking if you can play a record while using rekordbox dj or dvs with the DDJ-SX2, the answer is yes. When you flip the channel input switch over to PHONO - the software will show that the input for that deck is from the turntable rather than the software.
Grazie per la collaborazione ma il deck dovrei metterlo in absolute o relative? perché ho provato ma niente.
It doesn't matter -- in relative mode, you have access to the hot cues while using the timecode vinyl, but absolute mode prevents those from being used.
La traccia da vinile l'ascolto ma non viene caricata all'interno del software, cosa dovrei fare per farla caricare ?
Ho notato in un video a riguardo il rekordbox dvs che nella sezione preferenze in dvs sotto la i 4 deck per la calibrazione non mi compare routing setting "control Hardware" "rooting" come mai ?
ma il Giradischi dev'essere pioneer ?
No, the turntable can be any brand.
Are you trying to use DVS mode or simply play a music record?
DVS
With CH1 and CH2 on the SX2 set to PHONO on the input, rekordbox will look like this:
But that's only for playing an audio record through the player; if you want to use DVS, you need to set the input on the SX2 to PC.
Your Audio Preferences should look like this:
And once you have timecode playing, go to the DVS page and click the AUTO button below the deck to calibrate the tone, and the START button to the right to calibrate the balance.
Ho impostato tutto come mi ha detto ma la traccia del vinile comunque non viene caricata all'interno del software ! Non compare un'analisi della traccia e il bpm e tutto il resto.
Let's start over...
1) Connect your turntable to the LINE/PHONO input on CH1 of the DDJ-SX2.
2) Set the input switch (on the front of the SX2) to PC.
3) Within rekordbox, verify that you have DVS mode enabled (the checkbox at the top of the DVS preferences page).
4) On the Audio preferences page, verify that your audio device is the DDJ-SX2 2IN/2OUT.
5) Also on the Audio preferences page, verify that the input decks for DVS are set to PHONO and are assigned for CH1 and CH2.
6) Play your timecode.
7) On the DVS preferences page, click the AUTO button below the deck to calibrate the tone, and the START button to the right to calibrate the balance.
ma la calibrazione devo farla con un vinile vergine ?
Are you not using the rekordbox timecode?
la calibrazione la faccio con un vinile qualsiasi e non con un control vinyl
I thank you in advance for the support you are giving me hoping to solve the problem!!!
No -- the DVS mode is for use with timecode records only! rekordbox will support use of the official rekordbox vinyl or Serato noisemap vinyl.
If you want to use a regular record (music), there is no calibration required, and you must put the SX2 channel input selector to PHONO.
ok il vinyle riesco ad ascoltarlo ma non viene caricato nessun bpm all'interno del programma non carica niente.
Correct - the vinyl will play through the audio connection but the software is not intended to detect the BPM or do anything else. It's a "through" audio connection.
ok grazie mille per il supporto
Prego. Godere!
20 comments