[CLOSED] CDJ 850K with Traktor Pro 2.6 and Macbook Pro 2012 (only usb 3.0)
Is there a way to connect in midi my cdjs 850 control my traktor 2.6? I have 2 x USB 3.0 on my macbook pro 2012 with Mac Osx 10.8.2. I've tried to map thing but I've obtained only to use my cdjs as soundcards (with cdj aggregator). If I try to control the jogwheel or press play/cue nothing happens. I have the latest firmware installed (1.08). Please help!
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
@Raffaele > Do you get any response in Traktor at all? Have you tried running a MIDI monitor to see if you are getting any signal?
If you have a USB hub, try placing it between the CDJs and the USB port on your computer.
hello.
i have a windows 7 64 bits computer with usb 3.0 and I have also this issue.
I'm able to use cdj as output soundcard but no midi messages between cdj and pc.
could you help us?
I am able to use the cdj 850s with usb 3 with traktor but have to say works better with VDJ with windows 7 and windows 8 64bit.
There looks like there are issues with usb 3 drivers though, they seem to be a bit hit and miss.
A work around that seems to help most people is to plug a powered usb 2 hub into the usb 3 port and connect through that.
Hope this helps
I will check it this night. I will post the results today.
Thanks for your help!!!
I have checked it with a usb2.0 hub and no news. it does not work.
I'm going to open a new post
Can you guys try following this guide and see if it helps: http://pioneerdj.com/support/files/img/CDJ-850-TRAKTOR_En.pdf
Please report back if problems persist.
of course it persist. I made this the first time.
Have either of you tried using a MIDI monitoring application to see if the computer is receiving signal at all?
Mac - MIDI Monitor
PC - MIDI OX
yes, no midi messages.
When I use my xone 4d, i can see lot of midimessages.
@Eduardo > Do you have access to another computer with which you could test the CDJ to see if it's the CDJ or the computer / USB port?
the cdj works properly in other windows7 64 bits.
@Eduardo > And is that also a USB3.0 port?
No, the other windows7 64bits is not USB3.0
@Eduardo > Do you have access to a USB hub (powered preferably)? Can you setup your gear using the hub between the CDJs and the USB3.0 port on your problematic laptop?
Closed due to lack of response.
15 comments