interface 2
hi
when im in thru mode i have extrem low level output from the line output
is some option for internal gain for the phono preamp ?
i turn the gain full clockwise on my external mixer and its only about -10db ?
so its not possible to match the digital files only when i lower the detail files (mixer settings) but then i must also clockwise the external mixer and get some preamp noise ..
Post is closed for comments.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
@Daniel > Do you have the IF2 outputs connected to a line or phono input on your mixer?
Same Problem here!
To become the thru volume matching of a timecode signal on 12 o'clock on the gain i have to put the gain knoob to max
Can You help me to adjust?
IF2 outputs are connected to line of my rx2
Are you possibly connecting a phono output to a line input?
Well I have two technics mk2 these are in the input of the interface 2 and it is set to phono.
the output of the interface 2 goes into the line input of the xdj_rx2.
I using 2 Ortofon Concorde Dj S Systems. In The DVS Settings is Control mode on Turntables.
4 comments