Fresh rekordbox install on a new machine = E8302 C611 error
1) Operating System: Windows 7
2) OS Type: 64bit
3) rekordbox version: 3.0.2 rev.2524-3611
4) Using LINK:Yes trying to.....
4a) LINK Connection method: Ethernet wired. Onboard port and separate card, into several routers, both of which worked on my Vista install
4b) Using with CDJs: 2x CDJ2000 FW 4.30
5) Hard drive / Flash drive / SD card file system: NTFS & FAT32 sources tested (HDD) but both return the error code
5a) Does the device have multiple partitions: Some tested devices have multiple partitions, some do not
5c) With what utility did you format the device: Windows
6) Have you scanned your files for errors: Yes
7) Have you scanned your drive for errors: Yes
8) Is rekordbox crashing at all: No
8b) If not crashing, are there any error messages: No
9) Are you able to repeat / reproduce the problem: Yes it is constant
9a) If yes, can you do it consistently: Yes it is constant
10) Does the problem occur with one specific song: No
11) Any other notes regarding your setup only: All the tracks worked fine on my previous machine. This is not a database import issue as i am testing using a selection of randomly imported tunes - approx 400 files, every one of which that has been tested will not drag to the CDJ
12) Provide as much detail of the issue here: Files will not drag to a linked cdj. I had this issue with my vista install until i put the cdjs onto a standalone network controller card. The separate card is not helping on the windows 7 install.
Further research has revealed that the new nic is based on a realtek chipset and there appears to be reported compatibility issues which remain unaddressed.
Can't find help? Search our Support Site or alternatively, reach out to our Support agents
Went and bought a USB to Ethernet today and still have exactly the same error codes....
I eventually had to buy a cheap laptop with a different chipset on the network card to fix this.
2 years later, another new laptop, and again with the 8302 c611 error on anything i try and drag and drop onto my cdj2000s
Firmware is all up to date, latest version of rekordbox. Happens over multiple routers and even directly connecting 1 cdj to the laptop via ethernet doesn't change anything.
This seems to be a very persistent issue...
Fresh rekordbox install on a new machine = E8302 C611 error
1) Operating System: Windows 10
2) OS Type: 64bit
3) rekordbox version: 4.2.1
4) Using LINK:Yes
4a) LINK Connection method: Ethernet wired. Onboard port into several different routers, both of which worked on my Vista install. Also connecting directly.
4b) Using with CDJs: 2x CDJ2000 FW 4.33
5) Hard drive / Flash drive / SD card file system: NTFS & FAT32 sources tested (HDD) but both return the error code
5a) Does the device have multiple partitions: Some tested devices have multiple partitions, some do not
5c) With what utility did you format the device: Windows
6) Have you scanned your files for errors: Yes
7) Have you scanned your drive for errors: Yes
8) Is rekordbox crashing at all: No
8b) If not crashing, are there any error messages: Only on the CDJ display. Error 8302:C611
9) Are you able to repeat / reproduce the problem: Yes it is constant
9a) If yes, can you do it consistently: Yes it is constant
10) Does the problem occur with one specific song: No, even happens on the 4 sample files that are loaded into the RB library on install - Siren, Wave etc etc
11) Any other notes regarding your setup only: All the tracks worked fine on my previous machine. This is not a database import issue as i am testing using a selection of randomly imported tunes - approx 400 files, every one of which that has been tested will not drag to the CDJ
12) Provide as much detail of the issue here: Files will not drag to a linked cdj2000
2 comments